Danh Mục Sản Phẩm

Hỗ trợ trực tuyến

Ms.Thảo 0908460258

Ms. Mai 0906325339

Mss.Tú-0906325339

Mr.Giang-0903001173

Hotline 0908 460 258

Thống kê truy cập

Silicone Silglaze N-10

Silicone Silglaze N-10

Silicone Silglaze N-10

Giá : call
Mô tả sản phẩm
Silglaze N -10 neutral silicone sealant is a one-part moisture curing silicone. It is an easy to use general-purpose silicone designed for general purpose glazing and sealing applications where long-term reliability is required.

Chi tiết của sản phẩm

SILGLAZE N10 NEUTRAL SILICONE 
 
DESCRIPTION
Silglaze N -10 neutral silicone sealant is a one-part moisture curing silicone. It is an
easy to use general-purpose silicone designed for general purpose glazing and sealing applications where long-term reliability is required.
 
Weathering and UV resistance of Silglaze N -10 is excellent and very important in glazing for example where most organic sealants fail. It is unaffected by high and low temperature and its superior physical properties are retained after many years exposure.
 
APPLICATIONS
Silglaze N -10 has excellent adhesion to glass, ceramics, aluminium, GRP, granite, concrete, galvanised steel, and many plastics.
It can be used for: 
•Standard glazing of frames panels and shop fronts.
•Sealing environmental and refrigerated rooms, sheet metal, skylights, ventilators,
and air-conditioning units.
•Assembly of metal/plastic signs.
•Weather proofing etc
 
KEY PERFORMANCE PROPERTIES
• One part ready to use 
• Fast curing 
• Outstanding weather ability 
• Excellent  Adhesion
• Easy Application
 
SPECIFICATIONS
 
 
STANDARD GLAZING
A thin bead of sealant will tolerate more movement than a thick bead. Joint width and depth should not less than 4 mm. Maximum joint width should not exceed 25 mm. Depth should be half the width with a maximum of 10mm.
Spacer tape and backer rod foam is the recommended back up material to provide the correct depth of joint. If the joint is to shallow use a Spacer tape bond breaker. Do not allow the silicone sealant to contact the back of the joint or any staining material.
 
APPLICATION
Cut nozzle at a sharp angle slightly wider than the desired bead. Extrude sealant with a gun and toll with a round spatula within 5 minutes to spread the sealant against the joint surfaces.
When necessary to produce a neat appearance masking tape is recommended. This should be removed immediately after tooling before skin forms.
Uncured sealant should be cleaned off non-porous surfaces while in the uncured state with a commercial solvent.
 
SURFACE PREPARATION
All surfaces must be clean, dry, sound, and free from dust, oil, rust, or any other contamination. Metals should be cleaned with a non-oily solvent soaked clean cloth. Solvent should be wiped from the surface with a clean dry cloth. Use an alcohol such as methylated spirits on glass. For plastics contact the manufacturer for a  ecommended cleaning solvent. When used on remedial work all existing sealant must be removed.
 
STORAGE/SHELF LIFE
The shelf life of Silglaze N-10 is 12 months if stored in a cool dry place . The storage temperature should not exceed 25oC as this will decrease shelf life.
Packing: 300grm cartridge available in carton of 20.
 
HEALTH AND SAFETY
Contact with uncured product will irritate eyes. In case of eye contact immediately flush with water for 15 minutes and seek medical advice. Use in well ventilated areas. Keep our of reach of children. Avoid contact with skin or clothing. This product emits Methyl ethyl Ketoxime (meko) whilst curing.
 
LIMITATIONS
Silglaze N -10 is not recommended for use:
•On submerged joints where porous substrates permit water to the bond interface.
• In aquarium construction and structural glazing. GE recommends SCS1200 sealant
or Ultraglaze.
• For certain rubber products where bleeding of plasticiser may occur.
•In horizontal walkways where sealant will be subject to abrasion.

Sản phẩm cùng loại